Table of Contents
Advertisement
SEBU9066
Illustration 5
Typical example
The ether warning label is supplied loose for the
original equipment manufacture to install the label.
General Hazard Information
Illustration 6
Attach a "Do Not Operate" warning tag or a similar
warning tag to the start switch or to the controls
before you service the equipment or before you repair
the equipment.
g01154809
Illustration 7
Wear a hard hat, protective glasses, and other
protective equipment, as required.
Do not wear loose clothing or jewelry that can snag
on controls or on other parts of the engine.
i05737934
Make sure that all protective guards and all covers
are secured in place on the engine.
Keep the engine free from foreign material. Remove
debris, oil, tools, and other items from the deck, from
walkways, and from steps.
Never put maintenance fluids into glass containers.
Drain all liquids into a suitable container.
Obey all local regulations for the disposal of liquids.
Use all cleaning solutions with care.
Report all necessary repairs.
Do not allow unauthorized personnel on the
equipment.
Ensure that the power supply is disconnected before
you work on the bus bar or the glow plugs.
Perform maintenance on the engine with the
g00104545
equipment in the servicing position. Refer to the OEM
information for the procedure for placing the
equipment in the servicing position.
Pressure Air and Water
Pressurized air and/or water can cause debris and/or
hot water to be blown out. This action could result in
personal injury.
The direct application of pressurized air or
pressurized water to the body could result in personal
injury.
When pressurized air and/or water is used for
cleaning, wear protective clothing, protective shoes,
and eye protection. Eye protection includes goggles
or a protective face shield.
Safety Section
General Hazard Information
g00702020
7
Hide quick links:
Advertisement
Chapters
Table of Contents
