Switching To The "Operation" Screen; Operation/Setting Of All Indoor Units At Once; Operation/Setting Of Each Indoor Unit - Fujitsu UTY-DMMYM Operating Manual

11

6-2. Switching to the "Operation" screen

When selecting "Operation" from the Menu on the "Monitor"
1
screen with [Cursor button (Left/Right)] and [Enter button]
is pressed, "Operation (unit select)" screen is displayed.
Monitor
Room 1
Off
Room 4
Room 7
Menu
Operation
Proceed to [6-2-1. Operation/setting of all indoor units
2
at once] or [6-2-2. Operation/setting of each indoor unit] .

6-2-1. Operation/setting of all indoor units at once

Select "Select all" with the [Cursor button], and press
1
the [Enter button].
Operation
Select Room 1
all
Room 4
Room 7
Back:
Schedule
"Operation" screen is displayed.
2
Operation
All
On-Off
Off
Cancel:
Proceed according to the following operation/setting.
6-3-1. On/Off operation
6-3-2. Operation mode setting
6-3-3. Room temperature setting
Notice
When all indoor units are operated/set at once, [Fan
speed setting], [10 °C heat setting] and [Economy set-
ting] cannot be set. Set in each indoor unit.
En-11
Mo 10:00AM
Room 2 Room 3
Room 5 Room 6
Room 8
Function Schedule
Mo 10:00AM
Room 2 Room 3
Off Off Off
Room 5 Room 6
Off Off Off
Room 8
Off Off
Setting:
Function
Mo 10:00AM
Mode Set temp.
26
Cool
OK:
After setting, screen returns to the "Operation (unit
3
select)" screen. To terminate the setting, press the [Cancel
button] to return to the Monitor screen.

6-2-2. Operation/setting of each indoor unit

S elect an indoor unit (Room X) with the [Cursor button]
1
and press the [Enter button].
Display of indoor unit under operation
26
Auto,Cool,Dry or
Heat operation
Economy
operation
Notice
• If the operating mode sign or
"10 °C Heat" blinks, an incorrect
combination of operating modes
has been set.
Refer to [6-3-2. Operation mode
setting].
• The indoor unit displayed like the
right is set from the indoor unit
and outdoor unit to the remote
control prohibition. In this case,
°C
operation and setting cannot
be made by the Central remote controller. When this
indoor unit is selected, below indication is displayed
on the lower screen, and cannot proceed to the next
operation.
This indoor unit cannot be selected by the operation
of "Select all".
Operation
Room 1
Select Room 2
Off
Off
all
Room 4 Room 5
Off Off
Room 7 Room 8
Off Off
Back: Setting:
Schedule
°C
Fan operation
26
°C
Test operation
Back: Op. restricted:
Schedule
Mo 10:00AM
Room 3
Off
Room 6
Off
Function
10 °C Heat
10 °C heat
operation
26
°C
10 °C Heat
Room 2
Off
Function