Fujitsu UTY-DMMYM Operating Manual page 22

"Hour" is highlighted. Set the "Hour" with the [Cursor
3
button (Up/Down)].
Schedule 1
Room 1
Enable
1
Day
2
Time
3
End
4
Cancel:
When "Hour" is set, move to "Minute" by pressing the
[Cursor button (Right)].
"Minute" is highlighted. Set the "Minute" with the [Cursor
4
button (Up/Down)]. (Setting can be completed quickly if
the button is pressed continuously.)
Schedule 1
Room 1
Enable
1
Day
2
Time
3
End
4
Cancel:
If the time is set for 24 hours indication, move to "On/
Off" by pressing the [Cursor button (Right)].
If the time is set for AM/PM indication, move to "AM/
PM" by pressing the [Cursor button (Right)].
Set "AM" or "PM" with the [Cursor button (Up/Down)].
Schedule 1
Room 1
Enable
1
Day
2
Time
3
End
4
Cancel:
When "AM/PM" is set, move to "On/Off" by pressing the
[Cursor button (Right)].
Notice
Display of time is the same style as the setting. Refer to
[9. SUBMENU SETTING].
En-21
Mo 10:00AM
Mo Tu We Th Fr
6 00 AM – – –
– – : – – AM – – –
– – : – – AM – – –
– – : – – AM – – –
OK:
Schedule 2
Mo 10:00AM
Mo Tu We Th Fr
6 00 AM – – –
– – : – – AM – – –
– – : – – AM – – –
– – : – – AM – – –
OK:
Schedule 2
Mo 10:00AM
Mo Tu We Th Fr
6:00 AM – – –
– – : – – AM – – –
– – : – – AM – – –
– – : – – AM – – –
OK:
Schedule 2
"On/Off" is highlighted. Set "On" or "Off" with the [Cursor
5
button (Up/Down)].
Schedule 1
Room 1
Enable
Mo Tu We Th Fr
1 6:00 AM
Day
2 – – : – – AM
Time
3 – – : – – AM
End
4 – – : – – AM
Cancel:
When "On" is set, move to "Operation mode" by press-
ing the [Cursor button (Right)].
When "Off" is set, it is not required to set the "Operation
mode" and "Temperature" setting. (It cannot be set.)
"Operation mode" is highlighted. Set the "Operation
6
mode" with the [Cursor button (Up/Down)].
Schedule 1
Room 1
Enable
Mo Tu We Th Fr
1 6:00 AM
Day
2 – – : – – AM
Time
3 – – : – – AM
End
4 – – : – – AM
Cancel:
When "Operation mode" is set, move to "Temperature"
with the [Cursor button (Right)].
Notice
Operation mode is set to Cool, Dry, Heat, Auto. The
possible simultaneous operation combinations are re-
stricted. Refer to [6-3-2. Operation mode setting].
"Temperature" is highlighted. Set "Temperature" with
7
the [Cursor button (Up/Down)].
Schedule 1
Room 1
Enable
Mo Tu We Th Fr
1 6:00 AM
Day
2 – – : – – AM
Time
3 – – : – – AM
End
4 – – : – – AM
Cancel:
Notice
Possible temperature setting ranges are as follows:
·
Cool, Dry, Auto ................. 18 to 30 °C (64 to 88 °F)
·
Heat ................................. 16 to 30 °C (60 to 88 °F)
Mo 10:00AM
On – – –
– – –
– – –
– – –
OK:
Schedule 2
Mo 10:00AM
On Cool – –
°C
– – –
– – –
– – –
OK:
Schedule 2
Mo 10:00AM
On Cool 28
°C
– – –
– – –
– – –
OK:
Schedule 2