Advertisement
INSTALLATION AND INSTRUCTION MANUAL
The
The
Star Phantom
Star Phantom
®
Chevrolet Impala (2005+) Rear Window
Undercover Interior LED Lightbar
Models
ULB42-3 ULB42V-3
ULB44-3
(Discrete)
(Discrete Value)
(Gen 4 Starburst)
IMPORTANT:
Please read all of the following instructions before installing your new warning light.
PLITSTR372 REV. A
3/18/10
Advertisement
Table of Contents
Related Manuals for Star Headlight & Lantern The Star Phantom ULB42-3
Summary of Contents for Star Headlight & Lantern The Star Phantom ULB42-3
- Page 1 INSTALLATION AND INSTRUCTION MANUAL Star Phantom Star Phantom ® Chevrolet Impala (2005+) Rear Window Undercover Interior LED Lightbar Models ULB42-3 ULB42V-3 ULB44-3 (Discrete) (Discrete Value) (Gen 4 Starburst) IMPORTANT: Please read all of the following instructions before installing your new warning light.
- Page 2 Star Headlight & Lantern Co., Inc. assumes no responsibility for the integrity of the installation for this or any of its products. The Star Phantom ® uses state-of-the-art Light Emitting Diode (LED) technology.
- Page 3 The installer assumes all responsibility for the integrity of the installation. It is the sole responsibility of the owner to ensure the light is secure. Star Phantom ® is designed to be mounted on the inside of your vehicle.
- Page 4 5. Connect the two Roof Brackets to the Rear Headliner Mounting Bracket using one screw and washer for each. 6. Attach the ULB42-3 Phantom to the top of the brackets (see next page) using two screws and two washers for each bracket.
-
Page 6: Operating Instructions
® is designed with thirty-five different patterns, listed on the following page. Indicator LED Located on the bottom of the Star Phantom ® is an Indicator LED. When your light is activated in any mode, this LED will light up. - Page 7 ® will remember the pattern it was in when turned off and display the same pattern when re-activated. Once your Star Phantom ® is installed, please test all the patterns and options to familiarize yourself with the various patterns and the operation of the buttons.
- Page 8 These lights use state-of-the-art Light Emitting Diode (LED) technology. These warning lights are comprised of ultra-high intensity LEDs that are controlled by a solid state flasher unit to efficiently produce light output with lifetimes up to 100,000 hours. Under normal circumstances, you will not need to replace any LEDs in this light.
Need help?
Do you have a question about the The Star Phantom ULB42-3 and is the answer not in the manual?
Questions and answers