Panasonic KX-NCP500 Getting Started page 49

For KX-HGT100 SIP Telephones
1.
Using a DHCP server to automate the assignment of IP addressing information
The DHCP server automatically assigns the IP address of the KX-HGT100, the subnet mask address, and
the default gateway address to the KX-HGT100.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.3.2 Registering IP Telephones".
Follow the procedure below to assign IP addressing information automatically.
To start programming
Supply power to the KX-HGT100.
To set the IP address of the KX-HGT100
Select "Set network".
To end programming
Press PROGRAM .
2.
Not using a DHCP server when assigning IP addressing information
The IP address of the KX-HGT100, the subnet mask address, and the default gateway address must be
assigned manually.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.3.2 Registering IP Telephones".
Press PROGRAM .
Press OK. Select "DHCP".
4.3.1 Assigning the IP Addressing Information
C. Tone
Press OK.
Getting Started 49