Panasonic KX-NCP500 Getting Started page 38

4.3.1 Assigning the IP Addressing Information
KX-NT321
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR card in the Primary PBX (PBX IP Address)
Select "PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
Select "Secondary
PBX".
Press HOLD twice to return
to the Menu screen.
To end programming
Press STORE.
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT's power off,
and (2) hold the STORE button and 2 key while turning the power on.
38 Getting Started
Press PROGRAM
while "Searching" is displayed.
Select "PBX IP
Press SP-PHONE.
Address".
PBX IP Address
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
Press SP-PHONE.
Press SP-PHONE.
PBX IP Address
Select "Primary
PBX".
Press SP-PHONE.