Panasonic KX-NCP500 Getting Started page 37

KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR card (PBX IP Address)
Select "PBX".
ENTER
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
Select "Secondary PBX".
To end programming
STORE
Press "STORE".
Software version 2.00 or later only
ENTER Select "PBX IP Address".
PBX IP Address
ENTER
The IP-PT will reboot
and can then be
registered to the PBX.
4.3.1 Assigning the IP Addressing Information
SETUP
Press "SETUP"
when it is displayed.
ENTER
ENTER
PBX IP Address
Select "Primary PBX".
ENTER
Getting Started 37