4.2.3 Programming the Network Settings
32
Getting Started
4.
a.
From the system menu, click Private Network.
b.
Click TIE Table.
c.
In the Own PBX Code box, type the PBX code of
the local PBX in the network.
d.
In the first unused Leading Number box, type the
PBX code of the remote PBX in the network.
e.
In the corresponding Trunk Group list, select the
number of the trunk group to be used when making
calls.
f.
Set the number modification pattern, if necessary.
g.
Click OK.
5.
a.
From the system menu, click Configuration.
b.
Click Slot.
c.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
d.
Click Ous.
You will see a confirmation message.
e.
Click Yes.
f.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
g.
Click Shelf Property.
6.
a.
Click the Outgoing Call tab.
b.
Select the preferred En-bloc Dialling setting
(Overlap (default) or En-bloc
c.
Click OK.
).
*1