Bellfires BCC-28 Tall Installation Manual page 23

Pour in perlite beads insulation to absolute top of unit. Tap or
vibrate shell enclosure to settle perlite. Retap as necessary,
ensuring there are no voids. (23-1)
Continue filling and packing until the top of shell is covered.
Replace the BCC top lid enclosure and reinstall sheet metal
screws to hold it in place. (23-2)
Place stainless steel slip connector (Part #20) into 8" (204mm)
refractory Turbo opening. Place first section of HT listed chim-
ney section into slip connector. (23-3) Fill any loose space
around HT chimney with extra left over Hollow Wool ceramic
fiber insulation.
Perlite
23
Bellfires® BCC
8" Diameter
Listed Type HT
UL1482 or
ULC S627
Chimney
Slip
connector