Page 1
P P reparation manual Smart Bell 55/55 MF Serial number: Production date:...
Page 2
Barbas Bellfires BV. This document could contain technical inaccuracies or typographical errors. Barbas Bellfires BV reserves the right to revise this document from time to time in the contents thereof.
Dimensions Smart Bell 55/55 with an Insert frame 15 mm............21 Dimensions Smart Bell 55/55 with an Insert frame 50 mm............22 Dimensions Smart Bell 55/55 with an Insert frame 50 mm and Convection fan......23 Dimensions of the restriction plate.....................23 Available components for the concentric flue system......
• Preparation for installation This document refers to the Smart Bell 55/55 MF as 'the appliance'. This document is an essential part of your appliance. Read it carefully before you do work on the appliance. Keep it in a safe place.
Combustion air channel Supplies the appliance with fresh air from the outlet through the channel Outlet/terminal Entry for the combustion air channel and exit for the flue gas channel Smart Bell 55-55...
Do not use a combination of parts from different brands for the installation of the concentric flue system. • Before beginning the installation, check that the details on the rating plate correspond to the gas type and supply pressure to which the appliance will be connected. Smart Bell 55-55...
Requirements on the roof outlet Make sure that the outlet is installed at least 0.5 meter from the edge of the roof. Note: All the minimum distances are guidelines. Consult your national and local directives for the exact minimum distances. Smart Bell 55-55...
Under a balcony, walkway, etc. cony or walkway Under a balcony, walkway, etc. if the outlet extends to the front Apply the minimum distance for items A facing wall less than 2 meters from the outlet. on a wall. Smart Bell 55-55...
Install a concentric flue system as described in this section. Some configurations of the concentric flue system require the installation of a flue restriction plate. Different sizes of the flue restriction plate are delivered with the appliance. Refer to the Installation and maintenance manual. Smart Bell 55-55...
Possibilities for a concentric flue system with a roof outlet Rigid concentric flue systems 10/11/12/13 4,28,(100) Flue gas restriction plate width Concentric connection on the appliance is (min. - max.) Ø100-Ø150 mm 2.0 - 4.0 m 30 mm 4.0 - 12.0 m 40 mm Smart Bell 55-55...
Page 11
Concentric connection on the appliance is (min. - max.) (min. - max.) (min. - max.) Ø100-Ø150 mm 1.0 - 11.0 m 0 - 3.0 m 1.0 - 11.0 m Caution: Make sure that Y is at least 2 times larger than X. Smart Bell 55-55...
Page 12
Flue gas restriction plate width Concentric connection on the appliance is (min. - max.) Ø100-Ø150 mm 2.0 - 4.0 m 30 mm 4.0 - 12.0 m 40 mm Roof outlet using an flexible Ø100 mm liner in an existing lined chimney. Smart Bell 55-55...
Page 13
1.0 - 11.0 m 0 - 3.0 m 1.0 - 11.0 m Caution: Make sure that Y is at least 2 times larger than X. Roof outlet using an flexible Ø100 mm liner in an existing lined chimney. Smart Bell 55-55...
Page 14
Concentric connection on the appliance is (min. - max.) Ø100-Ø150 mm 2.0 - 4.0 m 30 mm 4.0 - 12.0 m 40 mm Roof outlet using an flexible Ø100 mm liner and flexible Ø150 mm liner in an existing unsound lined chimney. Smart Bell 55-55...
Page 15
0 - 3.0 m 1.0 - 11.0 m Caution: Make sure that Y is at least 2 times larger than X. Roof outlet using an flexible Ø100 mm liner and flexible Ø150 mm liner in an existing unsound lined chimney. Smart Bell 55-55...
Rigid concentric flue systems 0.16 m 10/11/12/13 4,28,(100) Flue gas restriction plate width Concentric connection on (min. - max.) (min. - max.) the appliance is Ø100- Ø150 mm 1.0 - 2.0 m 0 - 7.0 m Smart Bell 55-55...
Technical specification 5 5 .7 Dimensions Smart Bell 55/55 with an Insert frame 50 mm and Convection fan Dimensions of the restriction plate Width of the delivered flue restriction plates in mm Concentric flue connection Ø100 - Ø150 Roof-mounted outlet...
Chimney, min. Ø150 mm internal, totally gas tight. Chimney or fireproof sleeving. min. Ø160 mm internal. Ø100 mm internal flexible stainless steel gas vent chimney liner AISI 316TI. Ø150 mm internal flexible stainless steel gas vent chimney liner AISI 316TI. Smart Bell 55-55...
Available components for the concentric flue system 6 6 .2 Bellfires - Muelink & Grol system Ø100 - Ø150 Bellfires Color (*) Application Fig. Art./ OR- DESCRIPTION antr. rigid flex DER NO. Twin-wall balanced flue pipe. 302289 ● ● L= 500 mm.
Page 26
Stainless steel locking band 302293 ● ● ● Ø150 mm, quick-fastening. 302210 Silicone seal Ø150 mm. ● ● 302215 Wall strap. ● ● ● Set of ceiling finishing plates / 302214 ● ● ● Fire stops. Smart Bell 55-55...
Page 27
303776 the flexible concentric flue. ● ● (Minimum 3 screws per con- nection). Hose clamp Ø100 mm. (Mini- 304041 ● ● mum 2 per connection). Hose clamp Ø150 mm. (Mini- 304042 ● ● mum 2 per connection) Smart Bell 55-55...
Page 28
(**) Adjustable roof flashing for a slope > 45° can be supplied on request. When installing a balanced-flue “closed” gas fire in an existing chimney, ensure stainless steel flexible liners (Ø100 mm or Ø130 mm) conforming with BS 316 are used to conduct the spent gases. Smart Bell 55-55...
Page 30
● chimney or flat roof. Horizontal (wall) termination 37100610 kit, L= min. 365 mm / max. ● ● 585 mm. Stainless steel locking band 45150076 ● ● Ø150 mm, quick-fastening. 45150072 Wall strap, Ø150 mm. ● ● Smart Bell 55-55...
Page 31
GAS 100/150) Adapter: Bellfi res Ø130-200 mm → Poujoulat DUOGAS 37100614 Ø100-150 mm (Appliance ● ● 130/200 → Poujoulat DUO- GAS 100/150) Concentric reduction of Pou- joulat DUOGAS Ø130-200 37100613 ● ● mm → Poujoulat DUOGAS Ø100-150 mm Smart Bell 55-55...
flue pipe, L= min. 1100 / max. 100-150 1900 mm. ● ● Telescopic twin-wall balanced ATWIN 197 flue pipe, L= min. 600 / max. 100-150 900 mm. ATWIN 16 Twin-wall balanced flue el- ● ● 100-150 bow 15°. Smart Bell 55-55...
Page 37
Twin-wall balanced flue el- ATWIN 60F bow 90° - Short. Especially ● ● 100-150 for connection to a wall termi- nation. A 463 Roof termination - long, with ● ● ● 100-150 pipe, L = 1080 mm, Vertical. Smart Bell 55-55...
Page 38
100-150 Fire stops. Locking band, Screw-fasten- ATWIN 45 ing (Standard on all compo- ● ● 100-150 nents). ATWIN 22 Wall strap, adjustable. ● ● 100-150 ATWIN 23 Wall strap, distance adjusta- ● ● 100-150 ble 60-250 mm. Smart Bell 55-55...
Page 39
Ø100-150 Incl. Chimney(ceil- ing)plate 300x300 mm. ASDH2 Universal wall / floor support ● ● 100-150 Ø150 mm. Concentric reduction of H- A464 130 TWIN Ø130 / Ø200 mm → H- ● ● TWIN Ø100 / Ø150 mm. Smart Bell 55-55...
Twin-wall balanced flue pipe, TWG15 L = 250 mm Including locking ● ● 100-150 band. Twin-wall balanced flue pipe, TWG1801 L = 1000 mm with 4 spacer ● ● 100-150 brackets on the outside In- cluding locking band. Smart Bell 55-55...
Page 41
90° - with support leg In- ● ● 100-150 cluding locking band and sealing cap under. Twin-wall balanced flue el- bow 90° - short - eccentric. TWG1676 Especially for connection to a ● ● 100-150 wall termination TWG1619 In- cluding locking band. Smart Bell 55-55...
Page 42
flat roof With ● ● storm collar. KL72 150 Storm collar (spare part). ● ● Wall termination kit, L= 600 TWG1619 mm (horizontal) Adjustable. ● ● 100-150 Incl. locking band and one set of wall spacer plates. Smart Bell 55-55...
Page 43
Set of ceiling finishing plates / ZUDA99V Fire stops for a pitched roof : ● ● 0° - 30°. Set of ceiling finishing plates / ZUDA98V Fire stops for a pitched roof : ● ● 31° - 45°. Smart Bell 55-55...
Page 44
L= 200 mm. Including ● ● 100-150 locking band. Concentric pipe, L= 300 mm TWG10 with cleaning opening/inspec- ● ● 100-150 tion panel. Including locking band. Concentric elbow 90° with TWG19 cleaning opening/inspection ● ● 100-150 panel. Including locking band. Smart Bell 55-55...
Page 45
Insulation roof flashing, L= (17- LUX-ECO Max. 500 mm (adjustable). ● Wall thickness LUX-ECO In- sulation: min. 25 mm. Insulation wall flashing, L= LUX-ECO Max. 360 mm (adjustable). (19) ● Wall thickness LUX-ECO In- sulation: min. 25 mm. Smart Bell 55-55...
Page 46
Available components for the concentric flue system 4 4 6 Smart Bell 55-55...
Page 47
Available components for the concentric flue system Smart Bell 55-55 4 4 7...
Page 48
Y Y our Bellfires dealer 001 - 18.04.2018 - 347383...