Download Print this page

Bellfires SMART BELL 75-70 PF Instructions For Use & Manual Daily Maintenance

Gas fire with closed combustion system

Advertisement

Quick Links

INSTRUCTIONS FOR USE &
MANUAL DAILY MAINTENANCE
SMART BELL 75-70 PF
Gas fi re with closed combustion system
Bellfi res wishes you many cosy evenings with your new Bellfi res gas fi re
This document is an essential part of your gas fi re.
Read it carefully before use of the gas fi re and keep it in a safe place!
Serial number:
Production date:

Advertisement

loading

Summary of Contents for Bellfires SMART BELL 75-70 PF

  • Page 1 INSTRUCTIONS FOR USE & MANUAL DAILY MAINTENANCE SMART BELL 75-70 PF Gas fi re with closed combustion system Bellfi res wishes you many cosy evenings with your new Bellfi res gas fi re This document is an essential part of your gas fi re.
  • Page 3 Bellfi res English BELLFIRES GAS FIRE WITH CLOSED COMBUSTION SYSTEM: Smart Bell 75-70 PF (Premium Fire) (SB 75-70 PF) Instructions for use...
  • Page 4 Bellfi res English Instructions for use...
  • Page 5: Table Of Contents

    Bellfi res English CONTENTS Page 1. WARRANTY TERMS ................. 2. INSTRUCTIONS FOR USE ............... 3. USING THE APPLIANCE FOR THE FIRST TIME ........4. DAILY MAINTENANCE ................5. ANNUAL MAINTENANCE ................Instructions for use...
  • Page 6 Bellfi res English Instructions for use...
  • Page 7: Warranty Terms

    Bellfi res English WARRANTY TERMS Interfocos Warranty terms Interfocos B.V. guarantees the quality of the supplied Bellfi res hearth and the quality of the materials used. All Bellfi res hearths are developed and manufactured according to the highest possible quality standards. If, despite all this, something should prove amiss with the Bellfi...
  • Page 8 Bellfi res English it has not be used or maintained according to the instructions for use; it has been changed, neglected or roughly treated; it has been damaged as a result of external causes (outside the hearth itself), for example, lightning strike, water damage or fi re; 3.2.
  • Page 9: Instructions For Use

    Bellfi res English INSTRUCTIONS FOR USE INTRODUCTION Congratulations on your purchase of this modern Bellfi res gas fi re. This quality product will provide you with many years of enjoyment due to the fl ame effect and warmth that it provides. Please read the instructions for use carefully before using the appliance for the fi...
  • Page 10 Bellfi res English The gas fi re must never be used with the door open or the door glass removed. Never place fl ammable material on the ceramic log set. The fi lling of the main burner with embers, vermiculite granules, wood logs or pebbles / ‘fi...
  • Page 11 Bellfi res English FLAME EFFECT The appliance is supplied with a “Premium Fire” double burner, from the factory. This burner has a specifi c fl ame effect, see below for an impression. Both burners ON Only front burner ON Natural gas: The above sketches provide an impression of the fl...
  • Page 12 Bellfi res English OPERATION: REMOTE CONTROL Remote control 2.4.1 General Read these instructions carefully before lighting the fi re !! The appliance is operated by radio remote control. This comprises a hand-held transmitter and a receiver. The receiver is part of the gas control block assembly. The receiver and the gas control block are under in the appliance.
  • Page 13 Bellfi res English Electrical connections and batteries: Hand-held 2x 1.5V battery transmitter Type LR03 or AAA Receiver 6VDC Note: via the 5 wire cable No batteries in the from the Light-Module receiver. *) Module - Light and 230 VAC (optional) Convection fan *) During a power outage, you can temporarily install batteries in the receiver so that the appliance continues to operate.
  • Page 14 Bellfi res English 2.4.2 Hand-held transmitter The remote control works by radio signal. The hand-held transmitter is confi gured in the factory with a unique signal code. Figure 1: Hand-held transmitter Instructions for use...
  • Page 15 Bellfi res English Signal Time Indicator Child proof Thermostatic Mode Battery Status Fan-Symbol: Operating convection Count- fan (option). Fan speed down levels: 1 to 4 bars Timer Fahrenheit or Celsius: °F/12 or °C/24 hour Light-Symbol: Program Operating Ambient Mode lighting/Dimmer Temperature AUX-Function: Eco Mode...
  • Page 16 Bellfi res English SETTING FAHRENHEIT OR CELSIUS • To change between °C and °F, press buttons simultaneously. Note: Choosing °F results in a 12 hour clock. Choosing °C results in a 24 hour clock. SETTING THE TIME • Pres buttons simultaneously. Day fl...
  • Page 17 Bellfi res English IMPORTANT: SETTING UP SIGNAL CODE BEFORE USING THE APPLIANCE FOR THE FIRST TIME Before the appliance can be used, the receiver must fi rst learn the hand-held transmitter’s signal code. • Press the “RESET” button on the receiver, and keep this pressed until 2 beeps are heard.
  • Page 18 Bellfi res English 2.4.3 Operation (Remote control) MANUAL MODE (HAND-HELD TRANSMITTER) SWITCH ON THE APPLIANCE / IGNITING THE FIRE • Open the gas supply valve in the gas pipe to the fi re. Warning When the pilot light is ignited, the motor turns automatically to maximum fl...
  • Page 19 Bellfi res English Hand-Held Transmitter Two-Button Operation • Press button simultaneously until two short beeps and a blinking series of lines confi rms the start sequence has begun; release buttons. • Main gas fl ows once pilot ignition is confi rmed. •...
  • Page 20 Bellfi res English Pilot gas adjustment screw Adjustment screw (Factory set) (Puncture the casing Maximum burner pressure with a small screwdriver) (Factory set and sealed) Motor-knob 8-wire Receiver Jack Microswitch Figure 4: Gas regulating block • Possible error messages: * 3 seconds: short beeps, audible when the motor-knob operates: Receiver batteries need changing soon (having heard this signal, the appliance can be ignited another ten times approximately).
  • Page 21 Bellfi res English SETTING THE FLAME HEIGHT / EXTINGUISHING THE FIRE (STAND-BY) Gradually decrease fl ame height / Extinguishing the fi re • After ignition, the burner automatically sets the fl ames to the maximum height. • Press button to lower the fl ames and to turn off the burner.
  • Page 22 Bellfi res English Flame height directly to maximum position • Pressing the button twice automatically increases the fl ames to the high position. This is indicated by “ ” on the display. Note: Backlight must be on for high fi re and low fi...
  • Page 23 Bellfi res English Turning off the “rear burner” • Press button to turn the “rear burner” OFF. -symbol (AUX -function) disappears on the hand-held transmitter’s display. Notes: The “rear burner” always remains in the last switching position chosen. Also when the receiver’s batteries are depleted the “rear burner” remains in the last chosen setting.
  • Page 24 Bellfi res English CONVECTION FAN OPERATION (OPTION) The convection fan turns automatically ON and OFF and has 4 rotational speeds which can be adjusted from low (1 bar) to high (4 bars). SETTING 1. Press button and hold until fl ashes. 2.
  • Page 25 Bellfi res English COUNTDOWN TIMER ON / SETTING • Press button and hold until displayed, and hour fl ashes. • To select hour press button. • To confi rm press button. Minutes fl ash. • To select minutes press button. •...
  • Page 26 Bellfi res English MODES OF OPERATION Thermostatic Mode The room temperature is measured and compared to the set temperature. The fl ame height is then automatically adjusted to achieve the set temperature.   Program Mode PROGRAMS 1 and 2, each can be programmed to go on and off at specifi...
  • Page 27 Bellfi res English THERMOSTATIC MODE 1. Press button. 2. displayed, preset temperature displayed briefl y, and then room temperature displayed. 1. Press button. 2. Press button to enter Manual Mode. 3. Press button to enter Program Mode. 4. Press button to enter Eco Mode. SETTING 1.
  • Page 28 Bellfi res English PROGRAM MODE 1. Press button. , 1 or 2, ON or OFF displayed. 1. Press button to enter Manual Mode. 2. Press button to enter Thermostatic Mode. 3. Press button to enter Eco Mode. Note: The set temperature for Thermostatic Mode is the temperature for the on time in Program Mode.
  • Page 29 Bellfi res English DAY SETTING fl ashes. Press button to choose between , 1, 2, 3, 4, 5, 6, 7. 6. To confi rm press button. selected ON TIME SETTING (PROGRAM 1) , 1, ON displayed, is displayed shortly, and hour fl ashes. 8.
  • Page 30 Bellfi res English Note: Either continue to PROGRAM 2 and set on and off times or stop programming at this point, and PROGRAM 2 remains deactivated. Note: PROGRAM 1 and 2 use the same on (Thermostatic) and off temperatures for and Daily Timer (1, 2, 3, 4, 5, 6, 7).
  • Page 31 Bellfi res English Faults • If the signals from the hand-held transmitter do not seem to be reaching the receiver, the cause may be: * Spent batteries: replace the batteries. * An electronic problem: press the “RESET” button on the receiver. •...
  • Page 32: Using The Appliance For The First Time

    Bellfi res English USING THE APPLIANCE FOR THE FIRST TIME The gas fi re is coated with a lacquer layer resistant to high temperature. During the fi rst hours of operation, the burning in of the lacquer may result in an unpleasant smell.
  • Page 33: Daily Maintenance

    Bellfi res English DAILY MAINTENANCE • Ensure that as little dust, and as few particles of cigarette smoke, candles and oil lamps as possible pollute the air in the room in which the appliance is used. Heating of these particles by the convection system of the appliance could lead to discoloration of the walls and ceiling.
  • Page 34: Annual Maintenance

    Bellfi res English ANNUAL MAINTENANCE It is essential that the appliance, the complete concentric fl ue system (where possible) and the outlet are cleaned and inspected annually by a recognised fi tter/gas specialist. The safe operation of the appliance will thus remain guaranteed.
  • Page 36 Your Bellfi res dealer 01 - 201016 - 343243...