DM Series Monitor
Figure 5-17: DM-65 Panel Mounting
Tighten the panel retention screws that pass through the panel mounting clips
Step 3:
until the plastic caps at the front of all the screws are firmly secured to the panel
(
F igure 5-17).
5
5.5.2 Cabinet and Rack Installation
Each model of the DM series LCD monitor has a series of holes located on the rear of the
front panel for mounting the monitor to a rack or cabinet.
NOTE:
1. The DM-190 monitor requires two special mounting brackets for installation
into a rack or cabinet. Refer to Section
2. The DM-84 monitor uses panel mounting clamps for installation into a rack or
cabinet. Refer to Section
3. The DM-65 monitor uses panel mounting clamps for installation into a rack or
cabinet. Refer to Section
Step 0:
5 .5.2.2 for details.
5
5 .5.1.1 for details.
5
5 .5.1.2 for details.
5
Page 61