Audio Dubbing - Canon Optura 60 Instruction Manual

Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIG. IN).
This function is operated with the wireless controller.
CD
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
AUdio device
(e.g. CD player)
Signal flow
~
L
~
. . .
9.L:.:J3'"-7""""'---------....millLj)Dc
AUDlO[
I
STV-250N Stereo Video Cable
R~'"
(supplied)
@
Connecting a Microphone
See Recording with an External Microphone (CO 56).
. RIkAY
~\t€R~
~
.., '<- "
~
I
114
~~~)
I
AUDIO SETUP
l~l
AUDIO DUB.· .. AUDIO IN
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Press the MENU button and select [AUDIO SETUP]. Select [AUDIO
DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE
II
button on the wireless controller.
5. Press the AUDIO DUB. button on the wireless controller.
"AUDIO DUB." and"
=.."
appear.
6. Press the PAUSE
II
button on the wireless controller to begin
dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP. button on the wireless controller to stop dubbing.
Audio device: Stop playback.