Canon Optura 60 Instruction Manual page 115

o
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
a
When using the built-in microphone, do not connect any devices to the MIC
terminal (OPTURA60: or the advanced accessory shoe). OPTURA60: When
using the OM-50 Directional Stereo Microphone, do not connect any devices to
the MIC terminal.
o
You cannot use the DV terminal for audio dubbing.
o
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
o
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
a
You can check the picture on the LCD screen.
a
When you connect an audio device, check the sound via built-in speaker or
audio device. You can also connect a TV via S-video terminal.
o
When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV. When you
connect a TV via S-video terminal, you can check the picture on the TV screen
and the sound with headphones connected to the camcorder.
o
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
-
115