Step 1: Preparing The Power Supply - Canon Optura 60 Instruction Manual

Step 1: Preparing the Power Supply
p.
*-,
k
$$$.iI.
k ,
The camcorder can be powered by a battery pack or connected to a household power
source. Charge the battery pack before use.
Alta~blp:Q!c.lbeC'a,a~ttg~r:£aick;:." . .
1. Turn the POWER switch to OFF.
2. Move the viewfinder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Press lightly and slide it in the direction
of the arrow until it clicks.
To remove the battery pack:
1. Move the viewfinder upward.
2. Press the BATTERY RELEASE
button and slide the battery pack
upward.
18
C. . b arQb"lQ,. . t be. . . Battery.. ; eflck
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Connect the power adapter to the
camcorder's DC IN terminal.
TheCHARGE indicator starts flashing. It
glows steadily when charging is complete.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the
power outlet.
3. Disconnect the power cord from the adapter.