Returning To A Pre-Marked Position - Canon Optura 60 Instruction Manual

Returning to
a
Pre-marked Position
REW ....
button
If you wish to return to a particular scene
later, mark the point with the zero set memory
and the tape will stop at that point when you
rewind/fast forward the tape.
This function is operated with the wireless
controller.
~o ~
PLAy .....
~m-
bottoc
ZEROSET
_._~'-.
STOP.
MEMORY button
0 6 0
button
CAMERA PLAY (VCRJ
I
1. Press the ZERO SET MEMORY button at the point you wish to return
to later.
• "0:00:00
1m "
appears.
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, rewind the tape.
· "m"
appears.
• The tape stops automatically at "0:00:00
1m".
• The tape counter changes to time code.
~
If the time code has not been recorded consecutively, the tape may not stop
~ correctly at the scene marked with the zero set memory.
87