Audio Dubbing - Canon MVX460 Instruction Manual

Audio Dubbing

You can add sound on a tape with the built-in or with an external microphone.
This function is operated with the wireless controller.
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
OUTPUT
L
AUDIO
R R
Dubbing
Available only in the
MENU
( 63)
1. Load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
following procedure.
2. Select (
( ) the [AUDIO DUB.] option and press (
3. Set it to [AUDIO IN] or [MIC.IN] and press (
then close the menu.
4. Locate the scene you wish to start audio dubbing.
5. Press the PAUSE
6. Press the AUDIO DUB. button on the wireless controller.
"AUDIO DUB." and "
7. Press the PAUSE
dubbing.
• Microphone: Speak into the microphone.
•
8. Press the STOP
Downloaded From VideoCamera-Manual.com Manuals
94
: You can also add sound from external audio devices.
Connecting an Audio Device
mode.
AUDIO SETUP
: Continue directly to step 4.
: Select the audio source for the audio dubbing with the
) the [AUDIO SETUP] menu and press (
button on the wireless controller.
" appear.
button on the wireless controller to begin
Audio device: Begin playback.
button on the wireless controller to stop dubbing.
Audio device: Stop playback.
Signal flow
STV-250N Stereo Video Cable
(supplied)
Open the terminal cover
AUDIO DUB. AUDIO IN
). Then, select
).
) to save the changes,