Table of Contents
Advertisement
Problem
The tape stops during
playback pause.
Solution
When playback pause continues for more than 4 minutes 30
seconds during playback or audio dubbing, the camcorder
shuts off to protect tape and video heads. Playback the tape
again and press the .....
/11
pause button.
Memory Card Operation
Problem
Solution
CO
Memory card cannot be
Memory card was not facing the correct direction. Turn the
22
inserted.
memory card over and reinsert it.
Memory card cannot be
Insert a memory card.
22
recorded.
Memory card is full. Replace the memory card or erase
104
images.
Memory card is not formatted. Format the memory card.
105
File number reached maximum value. Set [FILE NOS.] to
73
[RESET] and insert a new memory card.
SD Memory Card is protected. Change the position of the
22
protect switch.
Memory card cannot be
Set the camcorder to CARD PLAY mode.
41
played back.
Insert a memory card.
22
Image cannot be erased.
Image is protected. Cancel the protection.
103
SD memory card is protected. Change the position of the
22
protect switch.
" QI "
flashes red.
Card error occurred. Turn off the camcorder. Remove and
105
reinsert the memory card. Format the memory card if flashing
persists.
Printing
Problem
The printer is not operating
even though camcorder and
printer are correctly
connected.
Solution
1. Set the camcorder to CARD PLAY mode.
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
CO
Editing
Problem
Solution
CO
Dubbing via the camcorder's
Set [AV" DV/=] (OPTURA60) or [AV .. DV] (OPTURA50) to
73
DV terminal does not work.
[OFF].
Wrong signal format. Dubbing may work via the AV terminal.
-
Refer also to the instruction manual of the connected device.
-
139
Hide quick links:
Advertisement
Chapters
Table of Contents
