Audio Dubbing - Canon MVX1i Instruction Manual

Audio Dubbing

You can add sound on a tape with the built-in microphone. With the MVX1Si you can also
add sound from external audio devices.
This function is operated with the wireless controller.
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Audio device (e.g.
CD player)
OUTPUT
AUDIO
Dubbing
Available only in the
MENU
( 62)
1. Load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2.
[AUDIO DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE
5. Press the AUDIO DUB. button on the wireless controller.
"AUDIO DUB." and "
6. Press the PAUSE
• Microphone: Speak into the microphone.
•
7. Press the STOP
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
You cannot use the DV terminal for audio dubbing.
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
102
L
R R
mode.
AUDIO SETUP
Press the MENU button and select [AUDIO SETUP]. Select
button on the wireless controller.
" appear.
button on the wireless controller to begin dubbing.
Audio device: Begin playback.
button on the wireless controller to stop dubbing.
Audio device: Stop playback.
Signal flow
MTC-100 Multi Cable (supplied)
AUDIO DUB. AUDIO IN