Canon Optura 60 Instruction Manual page 79

o
About the audio level indicator:
When [MIC LEVEL] is set to [AUTO], the audio level indicator switches on and
off with each press of the AUDIO LEVEL button.
~ ~
-aB~1 ~I
0 :
.
~
illlllllil
m . "
, - 1 " , )
~ ~
Level indicator
Guide (green bar)
Adj,y$;tiJ)g,.,.tbe.... l ::lgad.pbQ.ne.,~gJylJl:e." . . , . , .
The headphones terminal also serves as AV terminal. Headphones can only be used
when
"0"
is displayed on the screen. If not, change the setting ([lJ 42).
-
CARD CAMERA
I
o
The audio level can be changed when the green bar is displayed. We
recommend hiding the bar when you have finished adjusting to prevent
accidental changes.
o
The microphone level resets to [AUTO] when you switch the mode dial to
tmID.
o
When the data code is being displayed, the level indicator will not display.
o
We recommend using headphones when manually adjusting the audio level, or
using the microphone attenuator.
o
When sound is distorted even though the audio level indicator shows an
appropriate level:
Activate the microphone attenuator by setting [MIC ATT] to [ON]. The
microphone attenuator can also be used in CARD CAMERA mode.
CAMERA
m~~)
I
AUDIO SETUP
I~I
OVOLUME ..... _
Press the MENU button and select [AUDIO SETUP]. Select [0 VOLUME],
adjust the volume with the SET dial and press the MENU button.
79