Canon Optura 60 Instruction Manual page 121

o
Images not recorded with this camcorder, uploaded from a computer, edited on
a computer and images whose file names have been changed may not be
printed correctly.
o
Observe the following precautions during printing:
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
a
If the message "BUSY." does not disappear, disconnect the cable from
camcorder and printer and reconnect the camcorder to the printer.
a
Cancel Printing
Press the SET dial during printing. A confirmation dialog appears. Select [OK]
and press the SET dial.
- Canon PIXMAISELPHY OS printers: Printing stops even if it is incomplete and
the paper is fed through.
- Canon CP printers: A print in progress cannot be stopped. Printing stops
when the current print is finished, and the remaining prints are canceled.
a
Printing Errors
If an error occurs during the printing process, an error message appears
([JJ 142).
- Canon PIXMAISELPHY OS printers: Resolve the error. When printing does
not resume automatically, select [CONTINUE] and press the SET dial. If
[CONTINUE] cannot be selected, select [STOP], press the SET dial and retry
printing. Refer also to the printer manual for details.
- Canon CP printers: Select [STOP] or [RESUME] and press the SET dial. (The
[RESUME] setting may not appear with some error messages. In that case,
select [STOP].) Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below pn?cedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
a
When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
-
121