YASKAWA VS-606V7 Series Instruction Manual page 34

Description of Status Indicator LEDs
There are two LEDs on the middle right section of the face of the VS-606V7.
The inverter status is indicated by various combinations of ON, BLINKING
and OFF LEDs. RUN indicator and status indicator on the RUN button
have the same function.
: ON
(Green)
RUN
ALARM
(Red)
For details on how the status indicator LED's function at inverter faults,
refer to Section 8 "FAULT DIAGNOSIS" on page 134. If a fault occurs,
the ALARM LED lights.
NOTE
The fault can be reset by turning ON the fault reset signal (or pressing
STOP
key on the digital operator) with the operation signal OFF or by
RESET
turning OFF the power supply. If the operation signal is ON, the fault
cannot be reset by the fault reset signal.
34
: BLINKING (Long Blinking)
Operation ready
(During Stop)
: BLINKING : OFF
Ramp to Normal
stop Operation