YASKAWA VS-606V7 Series Instruction Manual page 113

Constant No.
n176
• Prohibiting constant read selection (n177)
Select this function to prevent accidentally overwriting the constants
stored in EEPROM or in the digital operator. Reading is not possible
when this constant is set to 0.
The constant data stored in the digital operator are safe from accidental
overwriting.
When reading is performed while this constant is set to 0, PrE
will blink. Press the DSPL or ENTER and return to the constant No.display.
Constant No.
n177
Name
Constant copy
function
selection
Name
Constant read
selection
prohibit
Unit Setting Range
rdy: READY
rEd: READ
CPy: COPY
vFy: VERIFY
-
vA: Inverter
capacity
display
Sno: Software
No. display
Unit Setting Range
0: READ prohibited
1
1: READ allowed
Initial Setting
rdy
Initial Setting
0
113