Erasing Tracks In A Group-Erase Gr - JVC 0802MWMMDWJEM Instructions Manual

Erasing Tracks in a Group—ERASE GR
This function allows you to erase a group together with
tracks in the group.
You cannot resume the tracks in the erased group.
Once a group is erased, the other tracks and groups are
renumbered.
• To stop any time during the editing process before step 6 ,
press GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press GROUP TITLE/EDIT repeatedly until
"ERASE GR ?" appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated by "– –."
4
Press GROUP SKIP
select the group you want to erase.
Ex.: When group 6 is selected
5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step 4 .
6
Press ENTER.
"EDITING" appears in the main display for a while,
then "WRITING" and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
– 50 –
or GROUP SKIP to