Return Of Goods Information - Hatteland JH 15T17 MMD series User Manual

Return Of Goods Information

Return of goods:
(Applies not to warranty/normal service/repair of products)
Hatteland Display referenced as "manufacturer" in this document.
Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When
you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories
received from our warehouse is returned. This applies to cables, powermodules and additional equipment except
screws or similar, user manual, datasheets or other written paper documents. Furthermore, the product must not have
any minor / medium or severe scratches, chemical spills or similar on the backcover, front frame or glass.
This is needed to credit the invoice 100%. Missing parts will not be subject for credit, and you will not get total credit
for returned product. You will either be charged separately or the amount is withdrawn from the credit. If you decide to
ship the missing items on the after hand, you will get 100% credit for that particular invoice or items received at
manufacturer incoming goods control. Please contact our service/sales department if additional questions
Approved packaging methods/materials:
(Applies to all shipments to manufacturer)
When returning goods, please make sure you surround the product with the following material, whenever possible:
Original packaging from manufacturer, firm foam material, bubble wrap or lots of PadPack paper or Foam chips/poly-
ester wrapped in sealed plastic bags. In any case, always use a solid cardboard box to surround everything.
Not approved packaging methods/materials are: Foam chips, expanded polyester, clothes, nothing, or too little, or
anything that will crumble and get into the ventilation holes of products and cardboard boxes that are not suitable to
secure the product during shipment.
Appendix 98
INB100036-1 (Rev 15)
IND100077-14