Steel City 45960C User Manual page 33

This table saw requires very little maintenance other
than minor lubrication and cleaning. The following
sections detail what will need to be done in order to
assure continued operation of your saw.
LUBRICATION
The table saw has sealed lubricated bearings in the
motor housing that do not require any additional
lubrication from the operator.
Use a wire brush to clean off the worm gears and
trunnions and apply a white lithium grease to keep
them lubricated.
CLEANING
Keep the inside of the cabinet clear of saw dust and
wood chips. With the table saw unplugged, vacuum out
the inside of the cabinet or blow out the inside with an
air hose. Be sure to use air pressure no higher than 50
P.S.I. as high pressure air may damage insulation.
33