Steel City 45960C User Manual page 22

CONNECTING SWITCH CORD TO
MOTOR CORD
1. Place the switch cord (A) through hole (B) in front of
Cabinet. SEE FIG. 22
2. Open motor cover, insert three prong switch cord (C)
into three hole outlet (D) of the motor cord.
SEE FIG,23
Fig.22
B
A
3. Pull slack in switch cord into the cabinet.
Make sure that the power cord inside of the cabinet
Is properly routed and clear of the saw blade and any
pinch points for all blade height and blade angle
Settings
Fig.23
MOUNTING RAILS, FENCE, POWER SWITCH
AND TABLE BOARD
The rail, fence assembly, power switch, and table board
can now be mounted to the saw. See Owner's Manual
for Fence Assembly Instructions which will address the
mounting of these parts.
22