Mitsubishi E55LCD Service Manual page 28

1. Application
This adjustment procedure applies to the 15-inch LCD display (E55LCD).
2. Standard setting state
Unless designated in particular, the test is carried out with the following state.
Power voltage
Input frequency
Input connector
OSD
setting
3. Names of each LCD monitor part, and adjustment method
3.1 Configuration of front control panel
3.2 OSD operation method
<Factory mode>
-Hot key for reset EEPROM data-
Press (▲) and (▼) button at the same time then power on.
-Hot key for Factory adjust-
Press MENU (
-How to return to User mode-
To return to User mode, turn POWER-SW OFF.
Item
BRIGHTNESS
CONTRAST
SHARPNESS
Color Temperature
OSD time off
Language
OSD transparency
Power saving
), and SELECT( ) button at the same time then power on.
State for Adjustment
AC100V ~ 240V
1024 X 768 ;75Hz
D-SUB
100%
80%
0
6500K
30 seconds
English
100%
Yes
4-2