Auto Adjust - Mitsubishi E55LCD Service Manual

Controls
OSD (On-Screen-Display) Controls
The OSD controls on the front of the monitor function as follows:
To access OSD press any of the control buttons. To change D-SUB signal input, auto detect.
Control Switch Function
Open menu
Auto-Adjust (Hot key)
Brightness (Hot key) / Decrease
Contrast (Hot key) / Increase
Power key
Brightness/Contrast Controls
BRIGHTNESS: Adjusts the overall image and background screen brightness.
CONTRAST: Adjusts the image brightness in relation to the background.

Auto Adjust

Auto Adjust: Automatically adjust the Image Position, the H.Size and Fine setting.
White Balance: Automatically adjust the image for white balance.
H-SIZE
Clock: Adjust the Horizontal size by increasing or decreasing the setting. Should the "Auto Adjust" function do
not give you a satisfactory pictire setting, a further tuning can beperformed using the "H-Size" function (dot
clock). For this Moiré test patten could be used. This function may alter the width of the picture. Use Up/Down
Menu to center the image on the screen. If the H-Size is wrongly calibrated, the result would look like on the left
drawing. The image should be homogeneous.
When H.SIZE
value is wrong.
Phase: Improve focus, clarity and image stability by increasing or decreasing this setting. Should the "Auto
Adjust" function and the "H.Size" function do not give you satisfactory picture setting, a fine tuning can be
performed using the "Fine" function. It improve focus, clearity and image stability by increasing or decreasing
this setting. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated the result would
look like on the left drawing. The image should be homogeneous.
When no OSD Display
Select to next menu
Select to next item
Press for adjustment of brightness
Press for adjustment of contrast
Switch change to power mode (Power ON/ Power OFF)
When H.SIZE
value is improved.
When PHASE When PHASE
value is wrong. value is correct.
English-5
1-10
When H.SIZE
value is correct.