Install Applications Using Microsoft Activesync; Install Applications Using A Storage Card; Launch Applications Automatically - Intermec CK70 User Manual

Install Applications Using Microsoft ActiveSync

Install Applications Using a Storage Card

Launch Applications Automatically

70 Series Mobile Computer User Manual
2 Double-click the application file to install it. The application file
should appear in the Software Vault.
3 From the SmartSystems console in the Software Vault,
drag-and-drop the application onto each mobile computer in your
network, or drop the application on a group of computers
contained in a folder.
When you only have a few computers to update with applications, you
can copy files using Microsoft ActiveSync. This procedure assumes
that Microsoft ActiveSync is installed on your PC and is up and
running.
1 Connect to the mobile computer via ActiveSync.
2 Copy the .cab files from your development PC to the computer.
3 Reboot or cold boot the computer.
4 After the boot process is finished, browse to the .cab files and tap
the files to install them.
Use a storage card to install applications on one computer at a time or
if you have no network connection.
1 Copy your application file to the storage card.
2 Install the storage card in the mobile computer.
3 On the mobile computer, browse to the Storage Card folder and
run your application.
There are two ways to launch an application automatically on a cold
boot:
• Set up your .cab file to place a shortcut to the application in the
\Windows\StartUp directory at install time.
• Use AutoRun.exe to start your application at boot time. AutoRun
ships on the computer and automates other operations.
Chapter 7 — Manage the Computer
101