Auto Standby; Unit Under Counter - Thermo Scientific Barnstead Nanopure TOC - UV Operation Manual

U S
SER ETTINGS
Note
If set to "YES", unit will automatically
enter Standby Mode only once per
day. If the unit mode is later
changed from Standby, the unit will
not again automatically enter
Standby until the preset Auto
Standby time is again reached.
Note
When "UNIT UNDER COUNTER" is
set to "YES," Auto Dispense will not
be available from the main unit dis-
penser.
32

Auto Standby

(Factory set to "NO")
This option allows for a convenient method for the user to
ensure that the Nanopure TOC - UV unit will be placed in
Standby at a predetermined time each day. This is espe-
cially convenient to ensure the unit is placed in Standby
during weekends.
1. From the "Nanopure (Idle) xx:xx:xx xx/xx/xx"
press the UP or DOWN arrow until display
reads, "Advanced Menu."
2. Press ENTER.
3. Press ENTER to proceed through the options
until "AUTO STANDBY START" is displayed.
4. Press the UP or DOWN arrow to choose "YES."
5. Press ENTER.
6. Press the UP or DOWN arrow until the desired
time is displayed for the unit to automatically
enter Standby.
7. Press ENTER.
8. Press BACK until you return to the (Idle) display.

Unit Under Counter

(Factory set to "NO")
This option will lock out any type of automatic dispense
out of the unit (Accudispense accessory D13661 will still
operate normally.) This will prevent accidental dispensing
from the unit if it is located under a counter or similar area
such that the unit dispenser is not in site of the user but
the display is (i.e. remote mounted display.)
1. From the "Nanopure (Idle) xx:xx:xx xx/xx/xx"
press the UP or DOWN arrow until display
reads, "Advanced Menu."
2. Press ENTER.
3. Press ENTER to proceed through the options