Environmental Specifications - Pro-face GP4104G1D Hardware Manual

Environmental Specifications

Surrounding Air
Temperature
Storage Temperature
Surrounding Air and
Storage Humidity
Dust
Pollution Degree
Corrosive Gases
Atmospheric Pressure
(Operating Altitude)
Vibration Resistance
Concussion Resistance IEC/EN 61131-2 compliant
Noise Immunity
Electrostatic Discharge
Immunity
Air quality requirements
Do not operate or store the GP unit where chemicals evaporate, or where chemicals
are present in the air:
DC Model
GP-4501T / GP-4503T
0...55 °C (32...131 °F)
-20...60 °C (-4...140 °F)
10...90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
3 -7
0.1 mg/m (10
For use in Pollution Degree 2 environment
Free of corrosive gases
800...1,114 hPa (2,000 m [6,561 ft] or lower)
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s
X, Y, Z directions for 10 cycles (approx. 100 min)
2
147 m/s , X, Y, Z directions for 3 times
Noise Voltage: 1,000 Vp-p
Pulse Width: 1 μs
Rise Time: 1 ns
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
Corrosive chemicals: Acids, alkalines, liquids containing salt.
Flammable chemicals: Organic solvents.
INOPERATIVE EQUIPMENT
Do not allow water, liquids, metal, and wiring fragments to enter the panel case.
Failure to follow these instructions can result in injury or equipment damage.
GP-4501TW
0...50 °C (32...122 °F)
3
oz/ft ) or less (non-conductive levels)
2
CAUTION
GP4000 Series Hardware Manual
AC Model
0...55 °C (32...131 °F)
Noise Voltage: 1,500 Vp-p
Pulse Width: 1 μs
Rise Time: 1 ns
99