Example - CipherLab 1504 User Manual

1504 Barcode Scanner

EXAMPLE

KEY TYPE = NORMAL
For example, if want to program the character "!" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if want to program the character "a" (= "1C" on the scan code table) as the prefix
code:
1. Read the "Configure Prefix" barcode.
2. Read the "Scan Code" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Shift" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = CTRL
For example, if want to program "Ctrl+A" and "Ctrl+$" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Left Ctrl" barcode.
3. Read the "Hexadecimal
4. Read the "Add Left Ctrl" barcode.
5. Read the "Hexadecimal
6. Read the "Validate" barcode to complete this setting.
192
User Guide
Value" barcode on page 194 for "2" and "1".
Value" barcode on page 194 for "1" and "C".
Value" barcode on page 194 for "3" and "1".
Value" barcode on page 194 for "4", "1" (= "A").
Value" barcode on page 194 for "2", "4" (= "$").
Enter Setup