CipherLab 1504 User Manual page 184

1504 Barcode Scanner
Field 4 Setting
1. Read the barcode below to divide field 4 by a specified terminating string.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
4. Read the "Discard Separator" barcode if the field separator is not desired in the field.
If not dividing the field by a specific separator, divide it by a specified length.
1. Read the barcode below to divide field 4 by length.
2. Read the "Decimal
3. Read the "Validate" barcode on the same page to complete this setting.
172
User Guide
Value" barcode on page 194 for the desired character string.
Value" barcode on page 193 for the desired field length.
Select
Field Separator
to Divide Field 4...
*Include Separator
Discard Separator
Divide Field 4
by Length
End Programming Format