Inter-Character Delay; Inter-Function Delay - CipherLab 1504 User Manual

2.2.7 INTER-CHARACTER DELAY

By default, the inter-character delay is zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time. Such delay time is inserted
between every character being transmitted. The longer the delay time is, the slower the
transmission speed will be.
1) Read the barcode above to specify the inter-character delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.

2.2.8 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read this barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 193 for the desired inter-character delay
Value" barcode on page 193 for the desired inter-function delay
Chapter 2 Selecting Output Interface
Inter-Character
Delay... (*0~254)
Inter-Function
Delay... (*0~254)
Update
47