Addon Security For Upc/Ean Barcodes - CipherLab 1504 User Manual

1504 Barcode Scanner

1.10 ADDON SECURITY FOR UPC/EAN BARCODES

The scanner is capable of decoding a mix of UPC/EAN barcodes with and without addons.
The read redundancy (2~30 times) allows changing the number of times to decode a
UPC/EAN barcode before transmission. The more redundancy selected, the higher the
reading security is, and thus, the slower the reading speed becomes. It will have to
compromise between reading security and decoding speed.
Note: UPC/EAN Addon 2 and Addon 5 must be enabled individually for this setting to
take effect.
1) Read the barcode above to specify the read redundancy for UPC/EAN barcodes. (It is
set to 2 by default.)
2) Read the "Decimal
scanner to re-read the barcode for 12 times.
3) Read the "Validate" barcode on the same page to complete this setting.
28
User Guide
Value" barcode on page 193. For example, read "1" and "2" for the
Addon Security Level
(*2~30)
Enter Setup