Access Control - Planet Enterprise WiFi System User Manual

7.4 Access Control

If you enable wireless access control, only those clients whose wireless MAC
addresses are in the access control list will be able to connect to your Access Point.
When this option is enabled, no wireless clients will be able to connect if the list
contains no entries.
Parameter
Wireless Access Control
Mode
MAC Address
Comment
Apply Changes
Reset
Current Access Control
List
Description
Click the Disabled, Allow Listed or Deny Listed of drop
down menu choose wireless access control mode.
This is a security control function; only those clients
registered in the access control list can link to this WLAN
Broadband Router.
Fill in the MAC address of client to register this WLAN
Broadband Router access capability.
Fill in the comment tag for the registered client.
Click the Apply Changes button to register the client to
new configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
It shows the registered clients that are allowed to link to this
WLAN Broadband Router.
30