There are 2 modes allow you configure – Gateway, Bridge and WISP mode.
The default value is "Bridge" mode
Parameter
Gateway
Bridge
Wireless ISP
Apply Changes
Reset
Chapter 6 Operation Mode
Description
In this mode, the device is supposed to connect to internet
via ADSL/Cable Modem. WAN type:PPPoE, DHCP client,
PPTP client or Static IP.
Each interface (LAN, WAN and Wireless) regards as
bridge. NAT, Firewall and all router's functions are not
supported
Switch Wireless interface to WAN port and all Ethernet
ports in bridge mode. Wireless interface can do all router's
functions
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
23