10.9 WatchDog
This page is used to do watchdog function using ping command. User set IP address,
interval and ping fail count conditions to decide whether router reboots or not.
Parameter
Enable WatchDog
WatchDog IP Address
Ping Interval
Ping Fail to reboot Count Fill in the value that is the threshold to reboot router when
Apply Changes
Reset
Description
Click to enable watchdog.
IP address that is referred.
Fill in the value by seconds.
ping fails.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
62