Planet Enterprise WiFi System User Manual page 44

Parameter
PPTP
IP Address
Subnet Mask
Server IP Address
User Name
Password
MTU Size
Request MPPE
Encryption
Attain DNS Automatically Click to select getting DNS address for PPTP support.
Set DNS Manually
DNS 1
DNS 2
DNS 3
Clone MAC Address
Enable uPNP
Enable Web Server
Access on WAN
Enable WAN Echo Reply Click the checkbox to enable WAN ICMP response.
Set TTL value
Enable uPNP
Enable Web Server
Access on WAN
Enable WAN Echo Reply Click the checkbox to enable WAN ICMP response.
Enable IPsec pass
through on VPN
connection
Enable PPTP pass
through on VPN
connection
Enable L2TP pass
through on VPN
connection
Set TTL value
Description
Allow user to make a tunnel with remote site directly to
secure the data transmission among the connection. User
can use embedded PPTP client supported by this router to
make a VPN connection.
If you select the PPTP support on WAN interface, fill in the
IP address for it.
If you select the PPTP support on WAN interface, fill in the
subnet mask for it.
Enter the IP address of the PPTP Server.
If you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
f you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
Fill in the mtu size of MTU Size. The default value is 1400.
Click the checkbox to enable request MPPE encryption.
Please select Set DNS Manually if the PPTP support is
selected.
Click to select getting DNS address for PPTP support.
Fill in the IP address of Domain Name Server 1.
Fill in the IP address of Domain Name Server 2.
Fill in the IP address of Domain Name Server 3.
Fill in the MAC address that is the MAC address to be
cloned.
Click the checkbox to enable uPNP function.
Click the checkbox to enable web configuration from WAN
side.
Click to Enable and set Time to Live value.
Click the checkbox to enable uPNP function.
Click the checkbox to enable web configuration from WAN
side.
Click the checkbox to enable IPSec packet pass through
Click the checkbox to enable PPTP packet pass through
Click the checkbox to enable L2TP packet pass through
Click to Enable and set Time to Live value.
44