Establishing A Connection Using The Online Wizard - Fritz! WLAN Repeater Installation And Operation Manual

Establishing a Connection Using the Online Wizard

The FRITZ!WLAN Repeater is preconfigured so that the radio
network name (SSID) and WLAN key of the FRITZ!Box are
adopted automatically upon connection with the FRITZ!Box.
To find out how to extend the range of your WLAN radio net-
work with the FRITZ!WLAN Repeater, continue reading from
page
For information about how to adjust the settings of the
FRITZ!WLAN Repeater using the user interface, continue read-
ing from
3.2 Establishing a Connection Using the Online Wizard
If your WLAN base station doesn't support WPS, you can con-
nect the FRITZ!WLAN Repeater with your WLAN base station
using the online wizard.
Start the online wizard on your computer. You can use the on-
line wizard if the following prerequisites are met:
Requirements
•
•
•
•
FRITZ!WLAN Repeater 310
17.
page 19.
Windows 7, Windows Vista or Windows XP with Service
Pack 3 or higher must be installed on your computer.
The computer must have access to the Internet.
The SSID (radio network name) of the WLAN base station
must be set to "visible" (announced). The SSID of a
FRITZ!Box is visible upon delivery.
If a MAC address filter is active in your WLAN base sta-
tion, the MAC address of the FRITZ!WLAN Repeater must
be entered there as an exception. You can also disable
the MAC address filter until the connection to the
FRITZ!WLAN Repeater is established.
13