Fritz! FRITZ ! WLAN Repeater 310 Manual

Hide thumbs Also See for FRITZ ! WLAN Repeater 310:

FRITZ ! WLAN Repeater 310

Connecting with CYTA ZTE Modem using WPS Quick connection

Prior initiating the connection check that the ZTE Modem is in operation and the

Fritz WLAN Repeater 310 is plugged on a power outlet close to ZTE. The Repeater

will restart, about two minutes after switched ON and the Leds for Power and

WLAN will go steadily ON...

1. Press the WPS button on the Repeater for approximately 6 seconds until the

Led WLAN starts flashing and then depress it...

Table of Contents

Do you have a question about the FRITZ ! WLAN Repeater 310 and is the answer not in the manual?

Page 1 FRITZ ! WLAN Repeater 310 Connecting with CYTA ZTE Modem using WPS Quick connection Prior initiating the connection check that the ZTE Modem is in operation and the Fritz WLAN Repeater 310 is plugged on a power outlet close to ZTE. The Repeater will restart, about two minutes after switched ON and the Leds for Power and WLAN will go steadily ON…...
Page 2 2. Then Press the WPS button on ZTE for approximately one second… 3. The Led WPS on ZTE starts flashing…...
Page 3 At least two Leds from all five showing the signal strength must be ON. USEFULL INFORMATION Download from play Store the FRITZ!AppWLAN application which gives information concerning the Wi-Fi network your phone is connected to, either ZTE or Fritz Repeater.