Establishing A Connection Manually; User Interface - Fritz! 1750E Installation And Operation Manual

Establishing a Connection Manually

You can establish the wireless connection to the wireless access point manually.
Requirements
 Your computer must have a LAN port.
 At the LAN port an IP address must
be obtained automatically (DHCP).
Establishing a Connection
1. Connect your computer with the
FRITZ!WLAN Repeater 1750E using
the LAN cable included in the
package.
2. Open the browser on your computer
http://fritz.repeater
and enter
the address fi eld.
3. The FRITZ!WLAN Repeater 1750E
Wizard appears and guides you
through the remaining confi guration
steps.
12
Next you can confi gure the
FRITZ!WLAN Repeater 1750E in a user
interface. For more information, continue
reading from page 13.
The FRITZ!WLAN Repeater 1750E can also
be manually connected with a wireless
access point.
in

User Interface

The FRITZ!WLAN Repeater 1750E has a user interface. In the user interface you can
confi gure the FRITZ!WLAN Repeater 1750E using a Wizard, enable functions, view
information about connections, change the operating mode, or perform a FRITZ!OS
update.
The user interface can be opened on every computer connected with the
FRITZ!WLAN Repeater 1750E or your wireless access point:
1. Open a web browser.
http://fritz.repeater
2. Enter in the address fi eld of the browser.
The user interface opens.
Web browser: opening the user interface with http:// fritz.repeater
13