Setting Up The Wi-Fi Connection - Fritz! 600 Quick Start Manual

Setting up the Wi-Fi Connection

Action
Plug the FRITZ!Repeater into an electrical outlet near the
1
FRITZ!Box.
2 Wait until the LED starts flashing slowly.
Start the connection on the repeater:
3
Press the Connect button. The LED flashes rapidly.
Start the connection on the FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press
button briefly. The WLAN or Connect LED flashes.
4
• FRITZ!Box with WLAN/WPS or WLAN button: Press button for
about 6 seconds until WLAN starts flashing.
• Different wireless router: press the button that starts WPS.
The connection is established when the LED on the FRITZ!Repeat-
5 er stops flashing. If the LED starts flashing slowly again, repeat
steps 3 and 4 of these instructions.
6 Reposition the FRITZ!Repeater.
For information on connecting the FRITZ!Repeater by Wi-Fi without pressing
the button, see the manual at en.avm.de/service.
14
Continue reading on page 15.
Illustration
Connect
within
2 minutes