Establishing A Connection Using The Online Wizard - Fritz! WLAN Repeater 300E Configuring And Troubleshooting

Establishing a Connection Using the Online Wizard

3.2 Establishing a Connection Using the Online Wizard
If your WLAN base station doesn't support WPS, you can con-
nect the FRITZ!WLAN Repeater with your WLAN base station
using the online wizard.
Start the online wizard at your computer. You can use the on-
line wizard if the following prerequisites are met:
Prerequisites
•
•
•
•
Connecting FRITZ!WLAN Repeater with FRITZ!Box
1.
2.
3.
FRITZ!WLAN Repeater 300E
Windows 7, Windows Vista or Windows XP with Service
Pack 2 or higher must be installed on your computer.
The computer must have access to the Internet.
The SSID (radio network name) of the WLAN base station
must be set to "visible" (announced). The SSID of a
FRITZ!Box is visible upon delivery.
If a MAC address filter is active in your WLAN base sta-
tion, the MAC address of the FRITZ!WLAN Repeater must
be entered there as an exception. You can also disable
the MAC address filter until the connection to the
FRITZ!WLAN Repeater is established.
Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
Connecting the FRITZ!WLAN Repeater to electrical power
Start a web browser on your computer.
Enter www.avm.de/en/repeater
the browser.
13
in the address field of