Table of Contents
Advertisement
5
Troubleshooting > Service Mode > Service Mode List > Service Chart Print 1
Items
IPSEC SETTING
IKERETRY
To set the IKE retry times.
IKEINTVL
To set the IKE retry interval.
SPDALDEL The default is "0"; when "1" is set, all
registered policies are deleted at next
startup to initialize policies.
After completion of initialization, the value
which has been set to "1" is automatically
reset to "0".
IPSDEBLE
To set when obtaining IPsec log.
PFW SETTING
ILOG KEEP Log retention time
Possible setting range is 1 to 48 hours, and
when the value in service mode is "0", it is
1 minute.
Restart is required to reflect the setting.
ILOG MODE Filter switching operation
IPTBROAD Multicast address application switching
value
EAPOL_WT
Time to wait for a response (or the next request) to
EAPOL packet sent by the device
■ SP .ADMIN.MODE
Items
MAINTENANCE C.
Not used.
5
Troubleshooting > Service Mode > Service Mode List > Service Chart Print 1
Description
Setting Range
0 to 1* to 3
1 to 5* to 30
0* to 1
0* to 10
0 to 1* to 48
0* to 1
0* to 10
10 to 30* to 120
Description
Setting Range
----
■ Service Chart Print 1
Use Service Chart Print 1 to check image density and color tint.
5-60
F-5-59
5-60
Advertisement
Table of Contents
