Table of Contents
Advertisement
1
Product Description > Operation > Control panel > Control Panel Key
Name
Status
[7] Job Indicator
On
The printer is receiving data.
Data remains in the printer memory.
Blinking
The printer is processing data.
[8] Main Power
On
The power of the printer is ON.
Indicator
[16] Paper Source
On
A paper source is selected.
Blinking
Printing cannot be performed because no paper is
Indicator
loaded.
The paper drawer is not installed.
■ Control Panel Key
Name
[2] Status/Cancel
When the printer is online
Key
If pressed when the Job indicator is on or
blinking (When data is being processed
or received), diaplay the job list. Select a
job from the list to cancel the job.
[3]
Utility Key
Diaplay the [Utility Menue]
menu. Prints information
about the printer settings
including the current
settings.
[4]
Back Key
Does not function
[5]
Online Key
Switches between online and offline . The printer is online when the
indicator under the key is on and is offline when the indicator is off.
[9]
Power Key
If [Sleep Mode] is set to a setting other than [Off], the printer enters
Sleep Mode.
[10] Job Key
Diaplays the [Job] menu.
You can print various log
list.
1
Product Description > Operation > Control panel > Control Panel Key
Discription
Function
When the
When the menu is
printer is
displayed
offline
Does not function.
Does not
Goes back up the
function
previous hierarchy.
Goes back up the
previous hierarchy.
Does not
Select the next upper item
function
in the same hierarchy.
When the setting value
is numeric, increase the
value. If you keep holding
down the key, the speed
of the value increasing is
increased depending on
the item.
Name
[11] Settings Key
Diaplays the [Setup] menu. Configure the
printing environment including the layout
adjustment and scaling print output.
[12] OK Key
Does not function
[13] Reset Key
Display the [Reset] menu. Performs the
printer reset operation, the print data
output, and the shutdown operation.
[14] Log In/Out Key
The log in screen for using MEAP
functions is displayed. Enter the Dept.
ID/PIN and log in to the printer.
[15] Application Key
It will transition to the Menu Screen.
Whenever the key is pressed, the
Printing Screen switches to → MEAP
Application 1 → MEAP Application
2...Meap Application 8 → USB Direct
Print → Printing Screen → Menu Screen
[17] Feeder Selection
Displays the [Select Feeder] menu.
Key
Specify which paper source is used to
print between the paper drawer and
multi-purpose tray and the paper size.
1-7
Function
Gose down the hierarchy
Executes the selected
item. Otherwise, goes
down the hierarchy.
Select the next lower item
in the same hierarchy.
When the setting value
is numeric, reduces the
value. If you keep holding
down the key, the speed
of the value decresing is
increased depending on
the item.
Does not function
1-7
Advertisement
Table of Contents
