Removing The Fixing Pressure Roller; Preparation; Procedure - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Fixing System > Removing the Fixing Pressure Roller > Procedure

Removing the Fixing Pressure Roller

■ Preparation

1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
3) Remove the Rear Cover.(Refer to page 3-13)
4) Remove the Rear Lower Cover.(Refer to page 3-15)
5) Remove the Rear Cover Rib Unit.(Refer to page 3-13)
6) Remove the Duplex Reverse Drive Unit.(Refer to page 3-35)
7) Remove the Fixing Assembly.(Refer to page 3-67)
8) Remove the Fixing Film Unit.(Refer to page 3-68)
3 Disassembly/Assembly > Fixing System > Removing the Fixing Pressure Roller > Procedure

■ Procedure

CAUTION:
Be sure not to touch the surface of the Fixing Pressure Roller.
1) Remove the Fixing Pressure Roller [1].
• 2 Bushings [2]
• 1 Gear [3]
[3]
[1]
[2]
F-3-168
3-73
3-73