Removing The Duplex Reverse Drive Unit; Preparation; Procedure - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Controller System > Removing the Duplex Reverse Drive Unit > Procedure
2. Be sure to keep the following in mind when installing.
• Fit the gear shaft [1] of the Main Drive Unit in the hole [2] of the host machine.
• Fit the hole [3] on the link with the shaft [4] on the host machine.
• Fit the hole [5] on the Front Door Arm with the shaft [6] on the host machine.
[2]
[4]
[6]
3 Disassembly/Assembly > Controller System > Removing the Duplex Reverse Drive Unit > Procedure
[1]
[3]
[5]
F-3-65

Removing the Duplex Reverse Drive Unit

■ Preparation

1) Remove the Right Cover.(Refer to page 3-16)
2) Remove the Rear Upper Cover (Left).(Refer to page 3-14)
3) Remove the Rear Cover.(Refer to page 3-13)
4) Remove the Rear Lower Cover.(Refer to page 3-15)
5) Remove the Rear Cover Rib Unit.(Refer to page 3-13)

■ Procedure

1) Free the harness [1] from the Harness Guide [A].
• 2 Connectors [2]
x2
[A]
3-35
[2]
[1]
F-3-66
3-35