Sp.admin.mode - Canon imageCLASS LBP6780dn Service Manual

5
Troubleshooting > Service Mode > Service Mode List (LBP3560/6750dn) > SP.ADMIN.MODE
Item
E-RDS E-RDS SWITCH Set to determine whether Embedded-
RDS is used.
• ON: Embedded-RDS is used.
• OFF: Embedded-RDS is not used.
RGW-ADDRESS URL can be checked and set here. For
the URL entry, use various keys (up/
down/left/right keys, Job Status/Cancel
key and Feeder Selection key). Then,
press OK key to set the entry. In the
very end of character strings, "down-
pointing arrow" is displayed. Up to 128
characters can be entered.
RGW-PORT Set the port number of server.
COM-TEST Communication test is executed. The
machine tries to connect to the server,
judges whether it was connected, and
displays the result.
COM-LOG Details of communication test result are
displayed. When any error occurs, the
time, error code and error information
are displayed. Up to 5 logs can be
stored and the latest log is displayed
CREAR Beside e-RDS setting value in the
service mode, schedule information,
alarm and filtering information are
cleared.
CA-KEY CREAR After executing this item, turn the power
OFF/ON t o set the CA certificate to the
default status.
MIB • ALL ACCESS: All information in the charge counter MIB
CHARGECOUNT can be collected.
• DISP ACCESS: Information displayed on LUI in the
charge counter MIB is displayed.
• NON ACCESS: All information in the charge counter MIB
cannot be collected.
SNMP canon_admin OFF: canon_admin community disabled OFF
READ ONLY: canon_admin community
enabled. MIB access is Read Only
READ WRITE: canon_admin
community enabled. MIB access is
Read/Write
canon_user OFF: canon_user community disabled OFF
READ ONLY: canon_user community
enabled. MIB access is Read Only
READ WRITE: canon_user community
enabled. MIB access is Read/Write
5 Troubleshooting > Service Mode > Service Mode List (LBP3560/6750dn) > SP.ADMIN.MODE
Description Setting Range
ON/OFF*
----
----
----
----
----
----
ALL ACCESS*/
DISP ACCESS/
NON ACCESS
ReadOnly
ReadWrite*
ReadOnly
ReadWrite*
Item
TCP DELAYED ACK ON: TCP ACK delay function enabled
OFF: TCP ACK delay function disabled
WOLtrans 1: New protocol (WSD) WakeUp enabled; old utility
WakeUp function using CPCA Echo (broadcast) packets not
supported.
2: New protocol (WSD) WakeUp enabled; old utility WakeUp
function using SNMP search broadcast packets not
supported.
3: Old Canon utility WakeUp function supported; new
protocol (WSD) WakeUp function not supported.
SLEEP ADVERTISE SWITCH Determines whether sleep advertise
function is used
PORT Specifies port number for sleep
advertise function
TTL Sets number of routers exceeding
sleep advertise message number
INTERVAL Sets sleep advertise interval (seconds) 60 – 600* –

■ SP.ADMIN.MODE

Item
MAINTENANCE C. Not used
Description Setting Range
ON*/OFF
1* – 3
ON*/OFF
1 – 11427* –
65535
0 – 3* – 254
65535
Description Setting Range
-
5-27
T-5-37
T-5-38
5-27